太阳辐射作用下浮顶油罐温度场的数值模拟

为了研究太阳辐射对浮顶油罐温度场的影响,有必要掌握受太阳辐射影响原油在浮顶油罐中的温度变化规律.通过分析浮顶油罐与环境换热过程,建立2×104 m3 浮顶油罐的三维模型,对一天内浮顶油罐油品及罐壁的温度变化进行数值模拟.结果表明:在以太阳辐射为主的环境变化影响下,浮顶油罐的近壁面和浮盘处会产生温度梯度较大的高温油层,深...     

FDS火灾模拟与应用

利用FDS(Fire Dynamics Simulator)对火灾模型的设置进行了探讨和分析。结合作者多年应用FDS的实践经验,给出了FDS在室外燃烧实验方面的一些使用方法,并指出了FDS的应用限制。     

Research on the modeling method of soybean leaf＇s structure simulation

Leaf is one of the most important organs of soybean. The modeling of soybean leaf structure is useful to research of leaf function. The paper discussed it from two aspects that were distilling method of leaf profile and establishing method of leaf simulation model. It put forward basic method of soybean leaf digital process, and successfully established simulation model of soybean leaf structure based on L-system. It also solved a critical problem in the process of establishing soybean growth simulation model. And the research had guiding significance to establishment of soybean plant model.     

隔板长度对紧凑型高速磁力泵水力特性及叶轮径向力的影响

为探究蜗壳内隔板长度对紧凑型高速磁力泵外特性与叶轮径向力的影响,根据蜗壳型式及隔板长度的不同提出6种蜗壳方案.设单蜗壳为方案一,其余双蜗壳方案根据隔板长度从小到大依次设为方案二至方案六.采用ANSYS-CFX软件对不同工况下(0.8Q_d,1.0Q_d,1.2Q_d)各蜗壳方案泵内流场进行数值模拟,得到不同蜗壳方案的泵中心面静压分布云图,并进行径向力分析.采用方案四蜗壳作为泵实型样机进行试验,将试验值与计算结果进行对比.研究结果表明:相较于无隔板的单蜗壳泵,采用有隔板的双蜗壳泵有利于平衡叶轮径向力,在额定流量下单蜗壳在x,y方向的径向力最大分量分别为151.2,149.7 N,是双蜗壳方案四的1.5倍;随着隔板长度的增大,泵的扬程与效率均逐渐提高,叶轮径向力不断减小,3种工况下扬程的模拟值与试验值偏差均小于3.0%;试验表明数值计算结果具有可信性,研究结果可为紧凑型高速磁力泵在提高水力性能以及平衡叶轮径向力方面提供一定参考.     

大网目底拖网在稳定流场中的数值模拟

通过有限单元法构建大网目底拖网渔具的数学模型,以计算在定常流条件下底拖网渔具的受力情况、网口扩张和渔具的形态变化.为了提高计算效率,提出了适用于拖网的网目群化方法.群化后的拖网模型为单元数6513的model-1模型和单元数1787的model-2模型两种规格,分别进行数值计算,并与水槽物理模型试验结果进行比较.结果表...     

湖泊渔业资源开发的系统动力学模型研究

采用灰色系统理论与国际先进的人工神经网络模拟相结合的先进技术，进行了太湖、濑湖和金鸡湖的渔业资源开发的系统动力学模型研究。认为控制捕涝强度是调空太湖针银鱼，梅鲚，白虾３个主要经济种群的关键因素，专家鉴定认为，本研究填补国内空白，居国内领先水平。     

Application of crop growth simulation and mathematical modeling to supply chain management in the Thai sugar industry

The poorly integrated cane supply planning between mills and cane growers in the Northeast of Thailand generates an excess of cane supplies that exceeds the mills’ capacity during the peak of harvest season. Each grower individually determines his/her cultivation plan by selecting planting dates and cultivars based on one’s own preference without taking into account the individual mill’s capacity and other growers’ plans. This situation causes most sugarcane grown in this area to reach its mature stage at the same period. In this study, we propose a framework of cultivation planning to cope with the problem. The focus of the cultivation plan is a long-term plan to determine the cultivation time, the cultivar selection and the corresponding prospective harvesting time window for each field such that overall sugar production is optimized.The crop growth model and a mathematical model are employed for yield simulation and optimization task. The crop growth model enables decision-makers to visualize cane production of each individual field at different dates with different cultivars and allow decision-makers to apply the mathematical programming to cultivation planning. The suggested framework has the potential to increase sugar production by 23% when compared to the traditional method.     

Modeling the water budget in a deep caldera lake and its hydrologic assessment: Lake Ikeda, Japan

The hydrologic assessment of a lake water budget can be helpful in achieving proper water management and sustainable water use. A model to analyze a lake water budget was developed and verified for Lake Ikeda, Japan. Lake evaporation was estimated by numerical analyses of lake water temperature and the lake energy budget. Inflow from the lake catchment area and leakage from the lake bottom were estimated based on the tank model and Darcy's law, and the model parameters were optimized by the shuffled complex evolution method. The estimated monthly lake evaporation rate is consistent with the evaporation rate estimated by the energy budget Bowen ratio method based on in situ data from 2004 to 2005. Moreover, the calculated time series of daily lake levels agrees well with those of measured lake levels during 1983 to 1999. Thus, the model is useful for evaluating the lake water budget. Numerical analysis reveals seasonal and annual variation characteristics in the water budget components. Precipitation, inflow from the catchment area, and river water supply are generally high during the rainy season from June to July with substantial annual variation. Lake evaporation is greatest in October and least in April, but the annual variation is relatively small. Agricultural water use is relatively high from April to September. There are no marked seasonal changes in leakage and drinking water use. The lake level is generally highest in September and lowest in March, which is characterized by seasonal changes in water budget components. The model was also applied to 17-year simulations under hypothetical hydrologic conditions to examine the effect of water use and agricultural water management on the lake level. Results indicate that river water supply, provided under the agricultural water management system, effectively compensates for the decrease in lake water resulting from agricultural water use.     

无级变速器电子控制单元硬件在环仿真系统

设计了无级变速器电子控制单元硬件在环仿真系统,进行了无级变速器电子控制单元硬件在环仿真试验,并且对仿真测试及优化后的电子控制单元进行了实车试验验证.结果均表明,该系统能够对车辆集成模型与电子控制单元的控制算法进行实时验证及优化控制,为无级变速器电子控制单元开发提供了一个仿真测试平台.